Water-based wood stain 750ml - RENNER RIO VERDE

Fields of application

RM 10XX Classic Impregnante is ideal for protecting and decorating wooden surfaces exposed to atmospheric agents. Suitable for:

• Windows and doors

• Garden furniture

• Coatings

• Balconies

• Fences

• Beading

• Beams

Product information

The RM 10XX Classic Impregnante penetrates deep into the wood fibers, protecting it from atmospheric agents and UV rays. However, the transparent version does not offer UV protection as it does not contain iron oxides.

Instructions for use

For raw wood

1. Sand with 150 grit sandpaper.

2. Clean the surface thoroughly to remove dust.

3. Apply 1-2 coats of Impregnante Classico RM 10XX with a brush, spray or rag .

For stained/impregnated wood

1. Make sure the previous finish is a low solid residue impregnator or stain .

2. Clean the surface and sand lightly with sandpaper or Scotch-Brite .

3. Remove dust and apply 1-2 coats of product.

For painted wood

1. Sand with 80-150 grit until the wood is returned to its rough state.

2. Clean the surface thoroughly.

3. Proceed with the impregnation by applying 1-2 coats of RM 10XX.

Overpaintable

The Classic Impregnante RM 10XX can be overpainted with the following finishes:

• Classic RF xx20

• UV Defender Extreme Protection RQ xx70

• Wax RC xx30

⚠ Not compatible with RF 1020 and RF 1120 trims on RM 2010 .

Technical features

• Solid residue: 11 ± 3 %

• Viscosity (DIN2): 50 ± 10”

• Specific gravity: 1.05 ± 0.1 g/cm³

• pH: 8.5 ± 1.0

• Yield: 12 m²/L

• Drying between coats: 1-2 hours

• Final drying: 3 hours

How to apply

✅ Ready to use
✅ Applicable with brush, spray or rag
✅ Mix well before use

Terms of use and storage

• Minimum storage temperature: > 5°C

• Minimum application temperature: > 10°C

Available formats

• 0.75 L

• 2.5 L

• 10 L (available only for RM 1010, RM 1210, RM 1310, RM 1410, RM 1610, RM 2010)